INSPECTRE ENGINEERS

Providing full technical support for the construction industry.

Sorry, your browser does not support inline SVG.

Inspect, revise, solve.

Inspectre Engineers was born due to the necessity of developers and project managers for having technical support during construction, since typically they do not have specialized personal on structures to perform this task, neither the project manager. However, we provide full technical support not only during the construction, we are able to revise the project before the construction begins, and after.

7
4

OUR

SERVICES

PRE- CONSTRUCTION

  • Project revision.
  • Site evaluation: geotechnical risk, seismic risk and site spectra, hydrological risk.
  • Topography survey validation.
  • Construction process evaluation and validation.

DURING CONSTRUCTION

  • Topography verification.
  • Verification of construction in accordance with the structural drawings.
  • Verification of materials compliance with design specifications.

POST- CONSTRUCTION

Existing structures Services:

  • Topography and structural measuring
  • As built drawings
  • Building drawings
  • Non-destructive testing
  • Building structural evaluation
  • Forensic engineering on structural failures
  • Construction’s volume calculation
FE-1
FE-2
FE-3
FE-4
Anterior
Siguiente

NON-DESTRUCTIVE TESTING

To carry out structural evaluation of existing buildings or the quality of buildings under construction, we use different equipment in accordance with each specific necessity, the equipment that we typically use are described below

PILE INTEGRITY TESTER (PIT).

This device is used to measure the integrity of piles, since it is impossible evaluating visually if a pile was properly constructed, this device can determine if the pile has construction defects on its length, such as voids, cavities, necking, widening, large cracks, etc.

DIGITAL ULTRASONIC THICKNESS GAGE

This device is used to measure the thickness of steel structural members, which measures the thickness with high precision, particularly in tubes and sheets, even in painted members. In addition is used to measure the internal corrosion in tubes.

FERROSCAN

This device is used to determine the rebar contained into the structural members, which is determined by ultrasound. It is used, when was not able revise the reinforcement after pouring a member, or for determining the reinforcement of existing buildings where no drawings exist.

WELDING INSPECTION

We use serval method for welding inspection, starting from visual inspection, liquid penetrant, and ultrasound flaw detectors.

LASER EQUIPMENT FOR MEASUREMENTS

This device is used to measure dimensions and distances with high precision.

VIBRATIONS MONITORING

The monitoring of vibrations is extremely important during the construction, particularly in constructions with deep excavations, since the high vibrations can damage contiguous structures and slopes. In existing buildings, the vibrations measurement is used to determine if the floors comply with the vibration limits for comfort depending on the building use, and to determine the dynamic properties of the buildings. The measurements are carried out with triaxial accelerometers with high resolution, which also allow long term measurements with wireless technology

REBOUND HAMMER

This device is used to determine the concrete strength without the necessity of extracting samples of the structural members.

COMPANY

ABOUT

The company is formed by civil engineers with background in construction, structural design, and supervision, where the combination of these disciplines provides the projects with a highly effective technical support.

The principal of the company is the engineer Ruber Rivera Martinez, who has an extensive experience in structural design, construction and nondestructive testing.

5

CONTACT US

Get in touch

Tell us what you need

    +52 (81)1359-9179

     

    info@inspectree.com